Easy way to clean up kitchen scraps after meal prep and chuck them in the bin.

Features:

1. Raised back / lowered front so you can scrape stuff into it off the edge of the counter without it falling on the floor
2. Pretty tough top so you can donk it on the bin
3. long (front-to-back) handle to give rotational torque
4. 5 finger holds because we have 5 fingers (turns out it only needed 4, but now you can have high and low grip).

The .3mf has 3 walls, and that zig-zag skin thing and ironing on (ironing makes it take a long time). I thought the zig-zag fill thing would make it use less fillament on the inside and be pretty strong on the outside; I don't know if it actually helps.

I printed it on the X1 Carbon - if it's too big for your printer, feel free to go in to the source and edit it: https://cad.onshape.com/documents/f9e923bd9ef268f23ab57b30/w/74dbfbe01f016f27179958ec/e/03acc411232f8e9d8666e5b8?renderMode=0&uiState=69828337a2b96e4e57febd4d

Just change the “inner-width" and everything else will follow.