Project: frie.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 118.66x190mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA Bambulab Basic Black Transmission Distance: 0.3
    PLA BambuLab Basic Green Transmission Distance: 2
    PLA BambuLab Basic Brown Transmission Distance: 2
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Matte Lilac Purple Transmission Distance: 2
    PLA BambuLab Matte Marine Blue Transmission Distance: 2
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Matte Ivory White Transmission Distance: 4
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Green
    At layer #9 (0.8mm) swap to Brown
    At layer #12 (1.04mm) swap to Orange
    At layer #14 (1.2mm) swap to Lilac Purple
    At layer #17 (1.44mm) swap to Marine Blue
    At layer #21 (1.76mm) swap to Beige
    At layer #25 (2.08mm) swap to Ivory White for the rest.