Project: aerit.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 116.25x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Matte Dark Blue Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Dark Blue
    At layer #7 (0.64mm) swap to Red
    At layer #9 (0.8mm) swap to Orange
    At layer #16 (1.36mm) swap to Ice Blue
    At layer #22 (1.84mm) swap to Beige
    At layer #26 (2.16mm) swap to Jade White for the rest.