This project adds a service hatch to the Qidi Box similar to the V2 design. The hatch allows easy access for maintenance.

Overview

• 3D Model: The included service-hatch-mount.stl and service-hatch-mount.FCStd files are designed for a the mounting frame.
• Material: Print the frame in ASA for heat and chemical resistance.
• Images: See the images/ folder for installation photos.

Steps

1. Measure and Cut the Hatch Hole
   • Use the feed circles as a reference.
   • Cut a hole sized 21.5 x 26.5 cm in the box using an oscillating multi-tool.
2. Print the Mounting Frame
   • Print 3d-model/service-hatch-mount.stl in ASA.
   • Insert threaded inserts into the screw holes (cut inserts in half if too tall).
3. Glue the Frame
   • Use a cyanoacrylate super glue with activator spray (e.g., "Loctite Super Glue with Activator") to bond the frame to the box.
4. Prepare the Cut Plate
   • Drill out the screw holes in the cut-out plate.
   • Mount the plate using screws into the threaded inserts.

Notes

• ASA filament is recommended for durability and heat resistance.
• Threaded inserts may need to be shortened for proper fit.
• Cyanoacrylate glue with activator spray provides a strong, quick bond.