HYPE CHAIN – PLA PRINT PROFILE (Bambu Lab)

Material: PLA (Silk recommended for shine)

Layer Height: 0.16mm

Initial Layer: 0.2mm

Walls: 4

Top/Bottom Layers: 4

Infill: 10–12% (Gyroid)

Nozzle Temp: 210°C

Bed Temp: 60°C

Cooling Fan: 100% (after first 2 layers)

Speed:

Outer Wall: 60 mm/s

Inner Wall: 120 mm/s

Infill: 180 mm/s

First Layer: 20 mm/s

Retraction: 1.0 mm

Z-Hop: 0.2 mm

Wipe: ON

Seam Position: Random

Ironing: ON (top surfaces only)

Build Plate: Textured PEI

Brim: OFF

Fine Tune (Important for chains)

Horizontal Expansion: -0.05 mm

Elephant Foot Compensation: 0.15 mm