PRINT TIMES are for all  objects on all plates. I remixed This great model https://makerworld.com/en/models/639061-cute-ghost-with-stanley-style-tumbler#profileId-566130 so that the ghost tumbler was hollow.

If you decided to print the ghost translucent like I did, the translucent Tumber just makes sense!

Print a translucent Tumber or translucent Tumbler with a “liquid” core insert". Uncheck the unwanted objects if you only want to print a translucent tumbler or just the core.

All models are printed BY OBJECT for less AMS waste and better transparency.

After inserting the “liquid core” you will need to glue the tumbler lid on.

Due to machine tolerances resizing of the core may be necessary using Bambu Studios. Do not resize the tumbler as it must fit the ghost.

I recommend "test fitting" the core by inserting the wide side first that way it does not get stuck if it is too large. If you insert the core with the thin end first it can get stuck half in and you may not be able to pull it back out.
 

• There are multiple plates.

#1 is for Translucent PETG tumbler and PLA “liquid” core insert.

#2 is for PETG at standard PETG temp for both tumbler and core insert.

I used Overture PETG - once printing begins IF using Bambi Handy I increased nozzle temp to 270 for a clearer translucent look. REMEMBER to lower the nozzle temp after that object finishes. Do Not use 270 for the lid, the straw fails.

WARNING the handles turning out melted is Hit Or Miss because they are so small and not a model or setting issue. I recommend printing multiple tumblers at once as they are fast and a small material amount.

Feel free to Open this in Bambu Studio to Resize the core based on the tolerance of your machine and print multple sizes of cores at once.