I did a Hueforge print for a friends car and sharing here. It came out pretty nice. Thanks for looking

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #17 (1.44mm) swap to Dark Brown
At layer #21 (1.76mm) swap to Ice Blue
At layer #24 (2mm) swap to Sakura Pink
At layer #29 (2.4mm) swap to Ivory White for the rest.