Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.3mm and the Actual Depth is 3.4mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Prusament Lipstick Red Transmission Distance: 3.3
PLA Prusament Royal Blue Transmission Distance: 0.8
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA Prusament Ms. Pink Transmission Distance: 4.1
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Lipstick Red
At layer #10 (0.88mm) swap to Royal Blue
At layer #12 (1.04mm) swap to Lilac Purple
At layer #19 (1.6mm) swap to Ms. Pink
At layer #25 (2.08mm) swap to Beige
At layer #35 (2.88mm) swap to Jade White for the rest.