Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.85x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm

    #080a0d PLA Black  Transmission Distance: 0.3
    #4c5f71 PLA Gray  Transmission Distance: 3
    #c63527 PLA Red  Transmission Distance: 5.5
    #e6e1de PLA White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #11 (0.96mm) swap to Volcano Orange Red
    At layer #15 (1.28mm) swap to Blue Gray
    At layer #17 (1.44mm) swap to White for the rest.