Project: Strawberry Shortcak.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 138.62x209.17mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 1.84mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #ce2029 PLA Sunlu Fire Engine Red  Transmission Distance: 4
    #06d255 PLA ESUN Green  Transmission Distance: 4
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Fire Engine Red
    At layer #11 (0.96mm) swap to Green
    At layer #13 (1.28mm) I added a pause to replace Black with White. 
    At layer #13 (1.12mm) swap to Sunflower Yellow
    At layer #16 (1.36mm) swap to Jade White for the rest.