This customizable canister with lid prints quickly because it is printed in spiral vase mode.

Both Canister and Lid are designed to be individually printed in Vase mode.
- If you generate Canister and Lid at once and put them in one STL file, remember to split them into multiple objects.
- Enable Spiral Vase mode: Processes > Global > Others > Special Mode > [x]Spiral Vase

- Print by object: Process > Global > Others > Special Mode > Print Sequence > By Object
- Set wall width to 0.56mm: Process > Global > Quality > Line width > First layer = 0.6 mm, Outer wall = 0.56 mm.
Lower 0.56 by 0.2 increments if lid is too tight.  Increase by 0.2 increments if lid is too losoe.

If your print is still slow (10mm/s):
Filament > Cooling > Part cooling fan > Max fan speed threshold layer time 1s.