Project: power.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 99.29x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyTerra Army Blue Transmission Distance: 0.3
    PLA bambulab Basic Latte Bronw Transmission Distance: 5
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Matte Lilac Purple Transmission Distance: 2
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Army Blue
    At layer #9 (0.8mm) swap to Latte Brow
    At layer #14 (1.2mm) swap to Orange
    At layer #16 (1.36mm) swap to Yellow
    At layer #19 (1.6mm) swap to Lilac Purple
    At layer #22 (1.84mm) swap to Beige
    At layer #25 (2.08mm) swap to Jade White for the rest.