Recommended Print Settings

Printer Type:
FDM (filament)

Layer Height:
0.16mm to 0.20mm (best balance between quality and time)

wall (Wall Line Count):
2 to 3 walls

Top/Bottom:
4 to 5 layers

Infill:
10% to 20% (Grid or Gyroid)

Temperature:
PLA: 200°C / Bed: 60°C
PETG: 230°C / Bed: 70–80°C
ABS: 240°C / Bed: 90–100°C

Print Speed:
50–60 mm/s

Supports:
necessary on the bottom part where the clock motor is located

Suggested Orientation:
Flat base on the bed for a better front finish