This Hueforge design showcases the Spider-man villain Venom hanging against a building.

• Framed version - The project file comes with a merged border to suit the frame available by clicking the GIF at the bottom.
• If you would like to remove the border to suit a stand, please follow the steps in the image.

Dimensions & print settings:

• 230x184mm Portrait
• 1.76mm Thick - Without border. With Border - 4mm.
• 0.4 Nozzle
• Layer Height - 0.08mm
• Base layer - 0.24mm
• 100% Infill
• 1 Wall
• 9999 Bottom Layers (personal preference to printing Hueforge)

Filaments Used:

PLA Matte Black TD - 0.1

PLA Bambulab Blue/Grey TD - 3

PLA+ Silver - TD - 2

PLA Bambulab Jade White TD - 5

Instructions:

• Start with Matte Black
• At layer #6 (0.64mm) swap to Blue Gray
• At layer #13 (1.2mm) swap to Silver
• At Layer @16 (1.44mm) Swap to Jade White for the rest.
• (With Border) At layer #21 (1.84mm) swap to border colour - Optional for an angled effect, I opted with black.

If scaling, please remember to keep the ‘Z’ the same, for this model, Framed: 4mm. Frameless: 1.76mm.

For a hangable easy fit FRAME - Click the GIF

For a small, simple and push together stand - Click the image

-------------------------------------------------------------------------------------------------------------------------------

Feedback, likes and boosts are always appreciated.

Enjoy.