Parametric corner alignment bracket for use with the Genmitsu 3020 300x200mm spoilboards. Takes m6 bolts. The following parameters are available for customization:

slotsY - the number of Y-axis (up/down) slots the bracket uses, not counting the corner slot. Default is 2.

slotsX - the number of X-axis (left/right) slots the bracket uses, not counting the corner slot. Default is 2.

thickness - the thickness of the model. Default is 15mm.

centeringDiameter - the diameter of the centering hole. Default is ¼" (6.35mm, sorry for the mix of metric and imperial)

headHeight - counterbore height for the bolts. Default is 2mm. Increase to make tops of bolts below-flush with the bracket.

headDiameter - counterbore hole diameter. Default is 12mm.