A standing grizzly bear sized as a charm for earrings or necklaces — about 28 mm tall, with a jump-ring bail baked into the crown so it hangs facing forward. Print a pair for Bearrings, or one for a pendant.

🐻 Details

• About 10 × 11 × 28 mm including the bail
• A jump-ring bail (2.5 mm inner) is baked into the crown of the head, with the hole running side to side so the bear hangs facing forward
• Add a 6 mm jump ring plus a fish-hook ear wire for an earring, or a lobster clasp on a short chain for a pendant
• Print two and you have a pair of Bearrings

🛠️ Print

Setting	Value
Printer	Bambu Lab — or any FDM
Material	PLA (brown makes a classic grizzly)
Layer height	0.12–0.16 mm (fine — for crisp fur detail)
Walls / infill	3 walls · 20 %
Supports	Tree supports recommended — the muzzle and front paws have overhangs
Orientation	Standing, as exported

💡 A brim helps the small footprint stick to the bed.

Single colour as shipped.