Project: stich.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.9mm

Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled White Transmission Distance: 5.7
PLA smartfil rojo Transmission Distance: 2.3
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to White
At layer #13 (1.12mm) swap to Black
At layer #21 (1.76mm) swap to rojo
At layer #29 (2.4mm) swap to White for the rest.