Internal Organizer Insert Compatible with Master Lock Key Lock Box

This 3D-printable insert helps keep keys upright and securely contained inside the lock box. It is compatible with Master Lock key lock boxes.

Two versions are included. Dimensions are listed as width × depth × height:

• Low version: 62 × 21 × 25 mm (approximately 2.4 × 0.8 × 1 in)

• High version: 62 × 21 × 35 mm (approximately 2.4 × 0.8 × 1.4 in)

• Screw hole diameter: 5 mm (approximately 0.2 in)

Check the internal dimensions of your lock box before printing, as dimensions may vary between different models.

Recommended Print Settings

• Infill: 20 %

• Materials: PETG or a stronger material, such as PC or ABS, for improved strength and durability. The models shown in the photos were printed in PETG.

• The STL files can be printed in their default orientation as loaded.

• Supports: Recommended

Disclaimer

This is an independent 3D printable accessory and is not affiliated with, endorsed by, or sponsored by Master Lock.

Note

The same version of this model is also available on Thingiverse. For documentation, printing instructions, updates, and the changelog, visit: https://www.thingiverse.com/thing:7383923

License

Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)

You are free to:

• Share — copy and redistribute the model in any medium or format

• Adapt — remix, transform, and build upon the model

• Use commercially

Under the following terms:

• Attribution — You must give appropriate credit to the original author

• ShareAlike — If you modify the model, you must distribute your contributions under the same license

This model is provided as-is, without warranty. Use at your own risk.