Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 90.93x83.23mm in size

 You may print at higher layer heights below the Base Thickness of 0.8mm

 The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.16mm

 #e2dedb PLA PolyLite White Transmission Distance: 5

 #00358e PLA BambuLab Basic Blue Transmission Distance: 4

 #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2

 #f97429 PLA Polysonic Orange Transmission Distance: 4

This print uses 4 unique filaments

Swap Instructions:

 Start with White

 At layer #10 (0.88mm) swap to Blue

 At layer #16 (1.36mm) swap to BambuLab Green

 At layer #21 (1.76mm) swap to Orange for the rest.