Creality Vacuum Pump Multibin Top
sweetfidget09
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2025-12-12 17:35:52
0
0
000Beschreibung
Tags
Modellquelle
Rezensionen(0)
Creality Vacuum Pump Multibin Top
Improved-fit vacuum pump insert designed for the Multibin system.
This version rebuilds the original insert geometry with adjusted tolerances and proper support for mechanical retention using the Multiboard Top Click Rim. The insert drops into a standard 2×2×1 Multibin shell and does not require glue or magnets.
Features
Improved tolerances for easier fit
Designed for use with the Top Click Rim
Revised pocket geometry based on real-world use
Compatible with standard Multibin shells
Uses less filament than a full-height bin insert
Printing Instructions
Orientation: Print upside down
Supports: Required (tree supports recommended)
Material: PLA tested; PETG also suitable
Walls: 3
Layer Height: 0.20 mm
Printing upside down significantly reduces material usage. Some horizontal pocket surfaces may show minor support artifacts, which does not affect functionality.
Assembly
Insert the part into the Multibin shell
Install the Top Click Rim
The rim mechanically retains the insert
Compatibility
2×2×1 Multibin Shell (LU – Topped Rail)
2×2 Top Click Rim
Creality vacuum pump and accessories
Credits
This model is a remix of:
Creality Vacuum Pump Insert for Multibin by Jay Shelton
2×2 Multibin Top – STEP Remixing File by Multiboard
Tags
Modellquelle
Original-Link: Details anzeigen
CC BY