This rabbit is simply perfect; I recommend scaling it to your liking in the slicer. I RECOMMEND THE FOLLOWING PRINTING SETTINGS:

• nozzle: 220°C

• bed: 60°C

• layer height: 0.3mm or 0.2mm (0.1mm is best, but it will take a lot of time)

• material: all kinds of PLA

I'm leaving a link to purchase Elegoo PLA, which I found very useful for these Easter prints.

LINK: https://www.amazon.it/ELEGOO-Filamento-Stampante-Precisione-Dimensionale/dp/B0CD779R2V/ref=sr_1_22?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1QPP5WLC3DBET&dib=eyJ2IjoiMSJ9.b2fI_Gd6qDBdsQV0v91FCZmnEdzLJJ7Ssw-S6tGEbyLBztK28JKRsLeca8i98X0_HAuQieaRvVCVCNdbsTs4AYyzDS30JpD6aDzxk1R3GaJzyOMe9mWvOHPLSYNSpi08DQebI-tNLDt9-n_wmK9t9mefnPiKG3MypYMcN53vsl2VTprXKFbxpR4xhks5e-tyHf4FkTRCKu-MbLyyzGMJl6Db2dBofXVaOj0VD9pYlJqWwKbFiyTvt-sz7SZWrLve7UK_huoeF7lP5-j6miqbmQ12wWunaSm4A_IG-spn15I.2X8A3Z3xlLIzJS12ibMGUatbLpYZTW3CjmRBG06s7O8&dib_tag=se&keywords=elegoo%2Bpla%2Bazzurro&qid=1773863100&sprefix=elegoo%2Bpla%2Bazzurr%2Caps%2C352&sr=8-22&th=1

THE MODEL NEEDS SUPOORTS (supports only from the bed)