Designed to work with the Bambu lab P1P Pegboard Model Here; https://wiki.bambulab.com/en/p1/modplate-customization

I would recommend printing these with a higher temp material e.g. PETG, ABS, ASA.

Should work best with the Pegboard Printed in black.

Frames will need to be glued onto the plates.

20% infill should be fine, but your using translucent materials maybe do higher unless you want to see infill.

I intend to use a 9x9 so I have some pegs free for tools at the bottom.

Not yet tested so if you have any tolerance issues please let me know.

Print Settings

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Filament: Any PETG, ABS, ASA Black/Whatever you want

Notes:

Category: 3D Printer Accessories