Case for K2 nozzles
MoistGrate
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2025-12-10 00:00:00
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Cover for K2 series printer nozzles.
K2, K2 PRO, and K2 Plus. Can also be used for K1 series nozzles.
Material: PLA, PETG, ASA, PCTG...
InFill: 10% and above.
Wall: 2 and above.
The lid is held in place by 6x5mm magnets.
A nut sized for the nozzle can be inserted into the center of the lid. It is best to heat it up a little and then insert it so that it does not move when the nozzle is released in the printer.
Modellquelle
Original-Link: Details anzeigen
CC BY