Magnetic Poster Holder
Leon Garcia
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-05-26 03:07:59
0
0
000Beschreibung
Tags
Modellquelle
Rezensionen(0)
Modular Magnetic Poster Holder
Can be used to hang a poster on a wall.
Modular design with 10 cm increments, to fit posters 30cm, 40cm or 50cm wide.
Has 12mm overhang on each side of the poster to fit a rope on both sides.
Needed materials besides filament:
Magnets 3mm x 1mm
Rope 6mm
Whatever glue you have
You can print just the top parts teice, or print each part twice if your poster is curled and needs weight to keep it down.
Instructions.
Put glue in the small hexagonal holes. Place magnets in the small hexagonal holes. Wait untill glue is dry.
Clamp the poster on the bottom with the holeless design and clamp the top with the holefull design.
Thread the rope through each hole at the top and tie the ends.
Hang it on your wall
Tags
Modellquelle
Original-Link: Details anzeigen
CC-BY