Filament Holder...Holder

Intro

A parametric filament holder...holder created with Blender Geometry Nodes (Blender 4.0.1), which maintain a certain distance between 2 Filament Holders (it's purchased online not printed!!). STL file has been tested on1kg Bambu Lab filament spool and should work for other 1kg spools.

Notes

1. Please double check the parameters for your filament holder before printing! 
2. Increase Gap Width to accommodate wider spools 
3. Increasing Bottom Thickness is not recommended since it may cause the filament holder to hang

For non-Blender users

1. Download and install Blender (free & open source 3D modeling software)
2. Open .blend file
3. Adjust parameters
4. Select the generated object (left or right click on object until you see a orange outline around it) and choose File->Export->Stl, check Selection Only, Scene Unit and Apply Modifiers then click Export STL
5. Open exported STL file in your slicer

Changelog

•  2024-3-2 Add OpenSCAD file

Feedback

Please leave a comment if you encounter any problem and/or have any suggestions.

Happy printing :)

Print Settings

Printer Brand:

Bambu labs

Printer: 

Bambu P1S

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.2

Infill: 

15%

Filament: Bambu PLA Green Post-Printin

Be careful not to break the print when you remove it from the bed!

How I Designed This

Blender Geometry Node Tree

Category: 3D Printer Accessories