Remote Stand
william_wright947
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-05-13 10:34:10
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Dieser Inhalt wurde automatisch übersetzt. Original anzeigen
A remote stand that can be used for most smart TV remotes. I designed it with a cavity to add clay for extra weight. To do this, print both the stand and the tray and pause at the layer before the clay cavity gets covered up. Pack the clay tray with air-dry clay and insert it into the part. Resume the print as usual. If you don't want to mess with that, you can just allow support material in the cavity and print as usual.
Print settings
Nozzle Temp - 235C
Bed Temperature - 80C
Print Speed - 70 mm/s
Retraction - 1mm @20mm/s
Support - On a clay cavity, if you don't want to use clay.
Infill - 15%
Modellquelle
Original-Link: Details anzeigen
CC-BY