This is my first attempt at making a Hueforge. I chose these colors to match my room, but you can feel free to try out other colors if you'd like.

The filling rate during printing is 100%, the layer height is 0.08mm, and the base layer height is 0.16mm.

The model size is 200x112.5mm.
You can print with a layer height that is greater than the minimum depth of 0.48mm.
The maximum depth is 2.2mm, and the actual depth is 2.1mm.

Consumables used:
Black PLA transparency: 0.3
Purple PLA, transparency: 1
Ice blue PLA, transparency: 3.5
White PLA, transparency: 5

Replacement instructions:
Starting with black
Switch to purple at the 12th layer
Switch to blue at the 18th layer
Switch to white at the 22nd layer