I designed this vise as a side project but it turned out to be pretty handy. These are the specs:

• 7 different parts of which 5 need to be glued together! (I know its not best, working on a more durable version with no glue needed)
• 2 printable screws for movable objects (I used BambuLab Lubricant for all movable objects to ensure smooth glide)
• 20mm range
• can be mounted to tables with a thickness of 10-30mm
• vise is 60x54mm wide

What to use it for:

• whenever small objects need to be held in place
• use it as your 3rd hand when soldering
• a small (not too heavy) table mount lamp
• anything light you want to be held in place on your desk

Obviously it is not a "real" vise so dont expect to use your hammer on it :D I use it for soldering projects

Printing specs and filament I used:

Filament = ASA CF but you can really use any stiff filament (any CF material is actually worse in terms of friction..)
Layer height = 0.1mm (important for good quality and low friction)
make sure to not use filament which widens during extrusion.

The printable screws can be optional if you use metal threads and glue them into the holes (I might actually work out such a model)

Feel free to add any suggestions or feedback!

None of all this was AI generated