Summary

This is a replacement "foot" for the DE22 drone. Its a work in progress but this will fit as is. This is not a 1/1 replica but an approximation based on the original and very very limited CAD skills The screw holes are slightly off but you can get all 3 screws in with a little effort. The walls get thin in some parts of the leg. I do get holes when printing at a fine layer height with some materials. ABS seems to not leave holes. The holes are cosmetic and don't effect function. Future revisions will address this, the screw alignment, as well as add a TPU tip to be more like the original. The leg is hollow to fit an antenna. keep that in mind when printing. You need to position it so that section doesn't need supports. it barely fits the antenna as is (you have to fiddle with it. not perfect but it works