Improved information:

I recreated a similar model in Fusion, but reduced the remaining area so that it could fit into the handle of the cutter when the cutter is closed

Overview:

A bracket used for closed flush cutters

Model description:

When I printed the basic model and similar models, I found that they were very suitable for open cutters, but it wasn't easy to use them with their lids. Because I liked them so much, I even made one for them.ModelTherefore, I decided to create this model so that I could easily use both of them.

Just like the basic model, it requires input fromOriginal publicationUse the 'insert-empty' function to connect to the HSW grid.

If you want to know how it was done, or just want to edit the model easily, the fusion file will be provided.

Printing information:

• Print the model with the long side facing down.
• Use the skirt edge to increase the adhesion to the print bed
• Use a 4-layer wall to achieve higher strength, as it is quite small.