Print with a layer height of 0.08 mm and a base layer of 0.16 mm, with a fill rate of 100%

The size of the model is 200x76.78 mm.
You can print at a higher floor height of less than 0.48 mm
The maximum depth is 2.2 mm, and the actual depth is 2.2 mm.

Consumables used:
PLA PolyLite Black, Transmission Distance: 0.3
PLA BambuLab Basic Blue-Grey. Transmission distance: 3
PLA Protopasta Gold, Transmission Distance: 5
PLA PolyLite white, transmission distance: 5
This printing process used four different consumables

Replacement instructions:
Starting with black
Replace it with blue-gray on the 8th layer (0.72 mm)
Replace it with gold on the 13th layer (1.12 mm thick)
Use white after the 19th layer (1.6 mm)