Bauhaus lampshade
KeenBadge9
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2025-11-05 03:07:35
0
0
000Beschreibung
Tags
Modellquelle
Rezensionen(0)
Dieser Inhalt wurde automatisch übersetzt. Original anzeigen
A modular Bauhaus-style ceiling lampshade.
As there are many types of fittings for ceiling lamps, this is designed to sit on the bulb itself with a small high-temperature heat separator to protect the PLA.
IMPORTANT: Only Use LED Light Bulbs as Shown - do not use incandescent bulbs - you don't want a pile of steaming burnt plastic on your floor!
0.2mm with 3 walls/top/bottom and 10% 2D infill. No support. Print the top and main parts in a light PLA/PLA+. Also print a heat separator, preferably in a higher temperature filament such as PETG.
The lampshade uses gravity with each section slotting into the one above. To assemble, put the bulb into the Heat Separator, add the Top, then the Bottom and lift - adjusting the parts until they sit nicely.
If you like this model, then please:
https://ko-fi.com/edinbeardragon
Tags
Modellquelle
Original-Link: Details anzeigen
CC BY-SA